Contempo Series Replacement Toilet Parts

by Universal Rundle

Keep your unique Contempo toilet in top working order with the repair and replacement parts you need from PlumbingSupply.com®! If you're looking for flush valves, trip levers, or other components, you'll find it right here. Need more Universal Rundle parts? Visit our page.

Contempo one-piece toilet

Replacement Parts for Contempo Series Toilet
One-Piece Model - 4009

Universal Rundle toilet parts for Contempo 4009 toilets

Model & Service Years Image Description Part # Price & Quantity
Contempo Toilet
Model: 4009
Made after Feb. 1994
fluidmaster 400a fill valve Fluidmaster 400A Fill Valve Ballcock - Replaces original ballcock
- Click and go to 400A repair parts
114 $16.62 Enter a quantity and
universal rundle 212 will-fit flush valve Flush Valve WF212 $101.35 Enter a quantity and
will-fit sc-tg-wa84 Flush Valve Gasket WA84 $1.44 Enter a quantity and
universal rundle toilet flapper 5173 Flapper for WF212 UR-5173 $10.64 Enter a quantity and
image unavailable Float Rod - 5" 123 Discontinued
plastic float ball Float Ball - (for original 114 ballcock) 102 $3.70 Enter a quantity and
universal rundle trip lever 306 Trip Lever 306 Discontinued

Not sure which model toilet you have? Try looking under the toilet tank lid or inside of the toilet tank.


Related Items & Information




Frequently Asked Questions

Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.

Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.

Have questions about toilet parts or toilet repair?

Toilet Repair Information & FAQs


return to top ↑

Copyright© 1995-2024 PlumbingSupply.com.
All Rights Reserved.