Adara Series Toilet Repair Parts

by Universal Rundle

If you are looking for a new replacement flush valve or trip lever for your Adara toilet, you found them - right here on PlumbingSupply.com®! Keeping your toilet working properly is important to the health of your family, and we have the parts you need. Looking for more parts? Visit our page, and if you need a new tank lid, click on our page.

Adara two-piece toilet
Tank 4441
Adara two-piece toilet
Tank 4461

Replacement Parts for Adara Series Toilet
Two-Piece Model - Tank 4441 (3.5 gpf)

Adara toilet repair parts by Universal Rundle

Model & Service Years Image Description Part # Price & Quantity
Adara Toilet
Model: 4441
March 1991 - Dec. 1993
fluidmaster 400a fill valve 400A Fill Valve - Replaces original ballcock
Go to 400A repair parts
193 $16.62 Enter a quantity and
korky plus 87 flush valve " Will-Fit" Flush Valve - Replaces original flush valve
- will need to be cut down to original valve height
- can use any type of saw (wood saw, hack saw, etc.)
- Please note: altered valves are non-returnable.
248 $14.99 Enter a quantity and
brass float rod 8 inch Float Rod (8") (for original #193 ballcock) 121 $3.10 Enter a quantity and
plastic float ball Float Ball (for original #193 ballcock) 102 $3.70 Enter a quantity and
american standard side push button actuator 738100-0020a chrome Side Mount, Push Button Trip Lever - 738100-0020A - Chrome
Replaces original trip lever
327 $29.34 Enter a quantity and
image unavailable Side Mount, Push Button Trip Lever - Brushed Nickel Discontinued
american standard side push button actuator polished brass 738100-0990a Side Mount, Push Button Trip Lever - 738100-0990A - Polished Brass
Replaces original trip lever
$49.40 Enter a quantity and
tank to bowl gasket wa75 Tank To Bowl Gasket - Recessed - #WA75 "Will-Fit" -- $4.39 Enter a quantity and
pas tank to bowl set 237ss Tank To Bowl Bolt Set - Stainless Steel -- $6.39 Enter a quantity and

Not sure which model toilet you have? Try looking under the toilet tank lid or inside of the toilet tank.


Replacement Parts for Adara Series Toilet
Two-Piece Model - Tank 4461 (1.6 gpf)

Adara toilet repair parts by Universal Rundle


- will need to be cut down to original valve height
- can use any type of saw (wood saw, hack saw, etc.)
- Please note: altered valves are non-returnable.
Model & Service Years Image Description Part # Price & Quantity
Adara Toilet
Model: 4461
Made after April 1994
fluidmaster 400a 400A Fill Valve - Replaces original ballcock
- Go to 400A repair parts
137 $16.62 Enter a quantity and
korky plus 87 flush valve " Will-Fit" Flush Valve - Replaces original flush valve 237 237 $14.99 Enter a quantity and
brass float rod 8 inch Float Rod (8") (for original #137 ballcock) 120 $3.10 Enter a quantity and
plastic float ball Float Ball (for original #137 ballcock) 102 $3.70 Enter a quantity and
american standard side push button actuator 738100-0020a chrome Side Mount, Push Button Trip Lever - #738100-0020A - Chrome
Replaces original trip lever
327 $29.34 Enter a quantity and
american standard side push button actuator polished brass 738100-0990a Side Mount, Push Button Trip Lever - Polished Brass - #738100-0990A
Replaces original trip lever
$49.40 Enter a quantity and
tank to bowl gasket wa75 Tank To Bowl Gasket - Recessed - #WA75 "Will-Fit" -- $4.39 Enter a quantity and
pas tank to bowl set 237ss Tank To Bowl Bolt Set - Stainless Steel -- $6.39 Enter a quantity and

Related Items & Information




Frequently Asked Questions

Q. "What are the most commonly replaced toilet parts?"
A.This depends on several factors. Your toilet's trip lever, flapper, and fill valve are operated each time you use your toilet. You will find, however, that the flapper and fill valve are the parts most exposed to water and will be the first ones to wear out in most cases.

Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.

Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.

Have questions about toilet parts or toilet repair?

Toilet Repair Information & FAQs


return to top ↑

Copyright© 1995-2024 PlumbingSupply.com.
All Rights Reserved.