Models 4421 & 4434 Toilet Repair Parts

by Universal Rundle

Searching for parts but not having any luck? If you have a Universal Rundle Model 4421, your search is over. Whether you need a flush valve or a float ball, we've got it! We here at PlumbingSupply.com® are pleased to offer these and many other Universal Rundle parts. Need a tank lid? Visit our page.


Replacement Parts for Model 4421 Toilet

Universal Rundle toilet replacement parts for models - 4421, 4434

Model & Service Years Image Description Part # Price & Quantity
Toilet Model: 4421
April 1970 - Jan. 1980
fluidmaster 400a fill valve #400A Fill Valve - Replaces original ballcock
- Click and go to 400A repair parts
134
140
$16.62 Enter a quantity and
korky plus 87 flush valve " Will-Fit" Flush Valve - Replaces original flush valve
- may need to be cut down to original valve height
- use any type of saw (wood saw, hack saw, etc.)
- Please note: altered valves are non-returnable.
234 $14.99 Enter a quantity and
brass float rod 8 inch Float Rod (8") 121 $3.10 Enter a quantity and
plastic float ball Float Ball 102 $3.70 Enter a quantity and
universal rundle 311 flush lever Trip Lever - Chrome 311
354
Discontinued
tank to bowl gasket wa75 Tank To Bowl Gasket - Recessed - #WA75 "Will-Fit" -- $4.39 Enter a quantity and
pas tank to bowl set 237ss Tank To Bowl Bolt Set - Stainless Steel -- $6.39 Enter a quantity and

Not sure which model toilet you have? Try looking under the toilet tank lid or inside of the toilet tank.


Replacement Parts for Model 4434 Toilet

Universal Rundle toilet repair parts for models - 4421, 4434

Model & Service Years Image Description Part # Price & Quantity
Toilet Model: 4434
Nov. 1973 - May 1982
fluidmaster 400a #400A Fill Valve - Replaces original ballcock
- Click and go to 400A repair parts
205
205D
$16.62 Enter a quantity and
image unavailable Flush Valve 256
256-2H
Discontinued
brass float rod 8 inch Float Rod (8") 121 $3.10 Enter a quantity and
plastic float ball Float Ball - Replaces #102 103 $3.70 Enter a quantity and
universal rundle 311 flush lever Trip Lever - Chrome 311
354
Discontinued
tank to bowl gasket wa75 Tank To Bowl Gasket - Recessed - #WA75 "Will-Fit" -- $4.39 Enter a quantity and
pas tank to bowl set 237ss Tank To Bowl Bolt Set - Stainless Steel -- $6.39 Enter a quantity and

Related Items & Information




Frequently Asked Questions

Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.

Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.

Have questions about toilet parts or toilet repair?

Toilet Repair Information & FAQs


return to top ↑

Copyright© 1995-2024 PlumbingSupply.com.
All Rights Reserved.