Edgemere Series Toilet Repair Parts
by American Standard
The Edgemere toilet by American Standard features a contemporary twist on classic elegance. It is designed to coordinate with their Edgemere Suite, so repair is often much more desirable than replacement. We offer many replacement parts for the Edgemere
series, so whether you need to replace the flush valve, repair your fill valve, or just need a new flapper, you will find what you need here.
Tank #4519A
Tank #4519A (Dual Flush)
Replacement Parts for American Standard Edgemere Toilets
Two Piece Models - #204AA, 204BA, 765AA, 765AB, 765BA, & 765BB / Tank #4519A
Replacement Parts for American Standard Edgemere Dual Flush Toilets
Two Piece Models - #204 / Tank #4519A
Related Items & Information
American Standard Toilet Parts By Series
Frequently Asked Questions
Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.
Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.
Q. "Are all American Standard® parts 'standard' and are ALL their products and parts made in America?"
A. A number of their products are made overseas (as is the case with many other plumbing manufacturers as well). Please do not assume that all products made by American Standard (Am. Stan.) are made in the U.S. The word "standard" and "American Standard®" are NOT identical. Most of their faucet parts will only fit their brand (as is the case with their competitors as well). Many of their toilet parts will only fit their brand of toilet. Not all of American Standard® parts are universal ("standard"). We get this question frequently, and it is probably because some people assume that since they have the word "standard" as part of their name that they must be using parts that are "standard"; as in universally fitting. Just as car bumpers don't fit on all brands of cars, parts for "standard" toilets and faucets will generally not fit on other brands. Generally you must buy parts specifically made for (designed to fit) your specific brand of toilet/faucets, etc.
return to top ↑
