Whirlaway 291 Disposer Replacement Parts

by Anaheim Manufacturing

Have you been looking for a replacement hopper assembly for your Whirlaway 291 disposer? Or, maybe the cushion mount ring or an outlet elbow? You'll find these and many more disposer parts here on PlumbingSupply.com®! When you need replacement parts for your Whirlaway disposer, we have what you're looking for. Looking for other Whirlaway products? Visit our page.

Whirlaway Gourmet Custom Series - Model 291
Item
#
Description Price & Quantity
1 Stopper
Only available in kit (item #1 & 2)
Discontinued
2 Splash Guard only $5.81 Enter a quantity and
1-2 Stopper & Splash Guard $11.08 Enter a quantity and
3 OEM Sink Flange
Only available in assembly kit (item #1-8)
Discontinued
Alternative Sink Flange - Chrome
other designer finishes available
$71.44 Enter a quantity and
4 Rubber Gasket (Thin) $1.89 Enter a quantity and
Will-Fit Rubber Gasket (Thick)
- install ridges up towards underside of sink
$2.94 Enter a quantity and
5 Waxed Fiber Gasket $2.84 Enter a quantity and
6 Support Ring $3.20 Enter a quantity and
7 Mount Ring
Only available in assembly kit (item #1-8)
Discontinued
8 Cushion Mount Ring $4.83 Enter a quantity and
1-8 Sink Flange Assembly - Chrome
contains items #1-8
$22.69 Enter a quantity and
9 Outlet Screws (2 pack) $1.52 Enter a quantity and
10 Outlet Flange Discontinued
Use Item #9-12
11 Outlet Elbow Discontinued
Use Item #9-12
12 Rubber Outlet Gasket $1.49 Enter a quantity and
9-12 Outlet Drain Elbow & Gasket Kit
includes items #9-12
$9.48 Enter a quantity and
13 Grind Ring Discontinued
Whirlaway Gourmet Custom Series - Model 191
Item
#
Description Price & Quantity
14 Drain Housing Discontinued
15 Thrust Washer Discontinued
16 Water Seal Discontinued
17 Spacer Seal Discontinued
18 Slinger Discontinued
19 O-Ring Discontinued
20 Turntable Discontinued
21 Hopper Assembly Discontinued
22 Hopper Screw (each)
4 hopper screws needed
$1.53 Enter a quantity and
Hopper Screws (4 pack)
4 hopper screws needed
$8.88 Enter a quantity and
23 Washer Discontinued
24 Armature Assembly Discontinued
25 Motor Stud Discontinued
26 Motor Stud Discontinued
27 Motor Shell Assembly Discontinued
28 Endbell Discontinued
29 Motor Brush & Spring assembly Discontinued
30 Hex Nut (each)
2 hex nuts needed
$1.53 Enter a quantity and
Hex Nuts (2 pack)
2 hex nuts needed
$4.43 Enter a quantity and
31 Inspection Plate Discontinued
32 Nut For Inspection Plate Discontinued
33 Shell Screw
3 shell screws needed
Discontinued
34 Lower Shell Discontinued

Related Items & Information

Frequently Asked Questions

Q. "My garbage disposer smells! Is there anything that I can do besides buying a new one?"
A. Generally the simple solution to this is to clean the disposer by having it grind up a few cups of ice and some table salt. This helps to cut the grease and slime off the sides of the disposer. Then flush it out with cold water followed by half of a lemon or lime to deodorize.

Q. "I installed my new disposer into a stainless steel sink but the thin gasket I used that came with the disposer keeps the flange slightly raised above the inside of the sink. Small amounts of water do collect around the flange. Should I have used plumbers putty?"
A. Some disposal manufacturers recommend using the rubber gasket that comes with the disposer. However, other disposer manufacturers recommend using plumbers putty. We believe if the flange is properly installed using plumbers putty, the installation will provide a seal for a longer length of time than the rubber gasket. When a flange is installed with plumbers putty the putty will keep water from leaking through it. The plumbers putty will also stay pliable over time. As the sink is used water comes in contact with the plumbers putty which slowly absorbs into the putty. The water actually acts as a lubrication for the putty and helps keep it from drying out. This is why sink flanges installed with plumbers putty can function for 20 years or more without leaking. If the sink is not used for 4 months or longer the putty will begin drying out which will lead to leakage when the sink is again used. If you have more confidence in using the rubber gasket and can live with small amounts of water left in your sink, then by all means use the rubber gasket.

Q. "I've heard that garbage disposer waste harms septic tanks. Any truth to that?"
A. We have yet to read any study that reflects that. Some cities have banned disposers and then, later changed their minds and allowed them, such as New York. From what we know, food disposer waste gets consumed by bacteria in sewage treatment plants and septic tanks.

It is the opinion of our Founder Vic that garbage disposers are not garbage cans, therefore, should not be used as such. Most potatoes peels, carrots and the like will not get chopped up well (with any brand), and can help clog your drain lines. He feels that food (garbage) disposers should be used sparingly. Much of what goes into your drains eventually has to be removed by sewage treatment facilities or be dealt with by some system.

return to top ↑

Copyright© 1995-2024 PlumbingSupply.com.
All Rights Reserved.