SharkBite® Push-Fit Valves & Gauges
Cut. Push. Done. Simple installation and ease of use make the SharkBite push-fit fittings and valves one of the fastest, easiest ways to plumb many residential or commercial jobs, and are easy to disconnect if needed. Fittings and valves can be easily changed and reused, so you'll save money with less wasted fittings. With many sizes and types to choose from, these fittings could solve all of your connection issues!
Not sure how to choose the right size for your application? Check out our easy-to-use
sizing chart for help
All of the SharkBite® valves and gauges on this page feature:
- Easy on - easy off instant push-fit connections with NO soldering, clamps, unions, or glue required - reusable when properly removed
- Decreased time and effort to install saves on labor costs
- Approved for use underground and behind walls without access panels
- Long-lasting DZR brass construction - all components are chloramine resistant for added durability
- 2014 Federal Safe Drinking Water Act compliant for potable and hydronic heating water distribution
- Certified for use in applications up to 200 psi & 200°F
- Connects hard copper type M, L, or K, CPVC, PEX, and PE-RT pipe in any combination
Ball & Check Valves
Standard Ball Valves
FIPS Ball Valves
Ball Valves with Drain Vent
Check Valves
Pressure Regulating Valves
EB45 Adjustable Pressure Regulating Valve
Factory set at 45 psi - adjustable from 10 - 70 psi
EB25 Pressure Regulating Valve
Factory set at 45 psi - twist cap with numerical pressure indicator for easy one-man adjustment
Gauges
Pressure Gauges
Temperature Gauges
Thermostatic Mixing Valves
These unique mixing valves feature:
- Provides mixed hot/cold water at a controlled temperature to help prevent scalding and injury related to thermal shock
- Delivers water at a maximum 120°F (49°C) without having to lower water heater temperature to unsafe levels where bacteria can flourish
- Quickly and easily installs using the SharkBite® push-fit system - perfect solution for retro-fits or repairs
Heatguard® 110-D - designed for installation at water heater to distribute to all fixtures (ASSE 1017, ASSE 1069 & ASSE 1070 approved)
Heatguard® 160 - designed to control temperature at individual or multiple fixtures in the same area (ASSE 1069 & ASSE 1070 approved)
SharkBite® Contractor's Fittings Kit
All of the most common SharkBite® fittings and tools in one handy kit
This handy carrying case is included
with the contractor kit!
Includes 2 Each
- 1/2" straight coupling
- 3/4" straight coupling
- 3/4" x 1/2" reducing coupling
- 1/2" female connector
- 3/4" female connector
- 1/2" male connector
- 3/4" male connector
- 1/2" elbow
- 3/4" elbow
Includes 1 Each
- 1/2" tee
- 3/4" tee
- 1/2" end cap
- 3/4" end cap
- 1/2" demount clip
- 3/4" demount clip
- 1/2" disconnect tongs
- 3/4" disconnect tongs
- depth & de-burr tool
SharkBite® Pipe Repair Contractors Kit with Carrying Case = $247.50
SharkBite® Contractors Carrying Case ONLY (no tools/fittings included) = $39.47
SharkBite® Demount (Disconnect) Clips & Tongs
SharkBite® Depth & De-Burr Tool
De-burr & mark proper pipe depth for 1/4", 3/8", 1/2", 5/8", 3/4", and 1" copper pipe
SharkBite® depth & de burr tool for 1/4", 3/8", 1/2", 5/8", 3/4", and 1" copper pipe = $19.80
Professional Plumber's Tubing Cutters
Order 100 or more of the soft pipe tubing cutter for additional savings!
Pricing discounts will show up in your shopping cart
Thread Sealants (for IPS threads)
To ensure our customers receive fresh products, TU-555 pipe joint compounds are non-returnable.
Related Items & Accessories
SharkBite® Valves & Gauges Sizing Guide
To determine what size SharkBite® valve or gauge you need, measure the OD of your copper, CPVC, or PEX pipe and compare to the Pipe OD Size listed below.
Nominal Size of Valve/Gauge |
Nominal Size of Pipe |
Pipe OD Size |
Pipe Insertion Depth |
1/2" CTS |
1/2" CTS |
5/8" |
15/16" |
3/4" CTS |
3/4" CTS |
7/8" |
1-1/8" |
1" CTS |
1" CTS |
1-1/8" |
1-5/16" |
Frequently Asked Questions
Q. "What is the SharkBite® system and how does it work?"
A. The SharkBite® system increases ease of use while decreasing the time and effort needed to connect water distribution pipe. The pipe is inserted into the fitting and held in place by several metal "teeth" and a durable grab ring. The pipe then passes through a specially formulated O-ring that compresses between the wall of the fitting and the tube to secure the joint. The joint can be disassembled only with a SharkBite® demount clip or tong.
Q. "Can I use SharkBite® fittings with soft copper tubing or rolled copper?"
A. No. Even though these SharkBite® fittings are remarkably innovative, they won't seal properly with soft or rolled copper and are for use only with hard drawn copper Types K, L, and M.
Q. "Do I need a stiffener to use SharkBite® valves with PEX?"
A. An integral PEX stiffener is not usually needed when using SharkBite® since they come equipped with an integrated Tube Support Liner that effectively supports the PEX tubing to ensure the O-ring seals correctly. However, please be sure to check local codes as they might have different requirements. Additionally, note that the Tube Support Liner is not required when using SharkBite® products with CPVC and copper, and can easily be removed if preferred or required by local code.
return to top ↑