Free Shipping on orders over $99!

SharkBite® Push-Fit Specialty Connectors

Cut. Push. Done. Simple installation and ease of use make the SharkBite push-fit fittings and valves one of the fastest, easiest ways to plumb many residential or commercial jobs, and are easy to disconnect if needed. Fittings and valves can be easily changed and reused, so you'll save money with less wasted fittings. With many sizes and types to choose from, these fittings could solve all of your connection issues!

Looking for SharkBite® fittings? We've got them! How about valves? Got those too!

Not sure how to choose the right size for your application? Check out our easy-to-use sizing chart for help

All of the SharkBite® specialty connectors on this page feature:

Easy on - easy off instant push-fit connections with NO soldering, clamps, unions, or glue required - reusable when properly removed
Decreased time and effort to install saves on labor costs
Approved for use underground and behind walls without access panels
Stainless steel 316 grip ring with EPDM O-ring creates a perfect seal
Long-lasting DZR brass construction - all components are chloramine resistant for added durability
2014 Federal Safe Drinking Water Act compliant for potable and hydronic heating water distribution (except for radiant fittings)
Certified for use in applications up to 200 psi & 200°F
Connects hard drawn copper type K, L, or M, CPVC, PEX, and PE-RT pipe in any combination

SharkBite® fitting cross-section

Water Heaters

Stainless Steel Braided Water Heater Hoses with SharkBite® Connections

These stainless steel braided water heater connector hoses can be used for residential or commercial water heaters to help make your water heater installation easier. So flexible you can easily connect your water heater to your hot or cold water supply lines no matter what the angle or piping differences might be. These flexible stainless steel braided hoses can connect iron pipe size (NPT) threads to Copper, CPVC or PEX without needing any additional transition fittings.

Water Heater Flex	Size	Price & Quantity
	1/2" CTS x 3/4" FIPS - 12" Length	$18.48
	1/2" CTS x 3/4" FIPS - 15" Length	$19.47
	1/2" CTS x 3/4" FIPS - 18" Length	$20.13
	1/2" CTS x 3/4" FIPS - 24" Length	$14.16

	3/4" CTS x 3/4" FIPS - 12" Length	$18.48
	3/4" CTS x 3/4" FIPS - 15" Length	$19.47
	3/4" CTS x 3/4" FIPS - 18" Length	$13.09
	3/4" CTS x 3/4" FIPS - 24" Length	$14.16

- OR - View Cart

Stainless Steel Braided Water Heater Hoses with SharkBite® Ball Valve

The same flexibility and connectivity as the hoses above BUT also include a ball valve to make water heater installations even easier. Connects iron pipe size (NPT) threads to Copper, PEX or CPVC without any additional transition fittings needed.

Water Heater Flex	Size	Price & Quantity
	1/2" CTS x 3/4" FIPS - 18" Length	$36.96
	3/4" CTS x 3/4" FIPS - 18" Length	$27.46

- OR - View Cart

Water Heater Installation Kits

These water heater installation kits include 2 fittings and a disconnect clip. One fitting for the hot outlet side and the other one for the cold inlet side of the water heater. You can connect Copper, PEX or CPVC directly to your water heater male pipe thread nipples with the use of these simple water heater installation kits.

Water Heater Kit	Size	Price & Quantity
	1/2" CTS x 3/4" FIPS	$12.01
	3/4" CTS x 3/4" FIPS	$12.01

- OR - View Cart

Water Softeners

Water Softener Hoses

These water softener hoses not only make installation easier but can also help deter water hammer caused by the abrupt on and off operation of water softener valves. Stainless steel flexible hoses tend to absorb much of the sudden impact caused by water quickly entering or pushing through the water lines, reducing sound travel through the piping system.

Water Softener Hose - 3/4" CTS x 1" FIPS swivel nut - 24" Length = $26.60

- OR - View Cart

Flexible Hoses

Flexible Hoses with SharkBite® Couplings

SHARKBITE® FITTINGS ON BOTH ENDS!
The solution to offset piping connection situations, or anywhere flexibility is needed.

Flexible Connector	Size	Price & Quantity
	1/2" CTS x 1/2" CTS - 18" Length	$13.09
	3/4" CTS x 3/4" CTS - 18" Length	$13.09

- OR - View Cart

Stops & Fixture Supply Fittings

Angle Stops

Sharkbite® 1/4 turn angle stops adapt to Copper, CPVC, or PEX positioned through walls to provide positive shut off valves for supply lines to faucets, toilets, ice makers, filters, drinking fountains and more. Available in 1/4", 3/8" or 1/2" standard compression or 1/4" CTS Sharkbite® outlets. The chrome trim ring included with each valve may be removed and reversed to use as a convenient disconnect tool.

Angle Stop	Size	Price & Quantity
compression outlet	1/2" CTS x 3/8" Compression	$10.09
	1/2" CTS x 1/4" Compression	$10.09
	1/2" CTS x 1/4" CTS (3/8" OD) (Sharkbite® outlet)	$10.09

compression outlet	1/2" CTS x 3/8" Compression Loose Key	$17.82
compression outlet	1/2" CTS x 1/4" CTS (3/8" OD) Loose Key (Sharkbite® outlet)	$11.58

- OR - View Cart

Straight Stops

Sharkbite® straight stops adapt to Copper, CPVC, or PEX installed through floors to provide positive 1/4 turn shut off valves for supply lines to faucets, toilets, ice makers, filters, drinking fountains and more. Your choice of either 1/4", 3/8" or 1/2" standard compression or 1/4" CTS Sharkbite® outlets. Each valve includes a chrome trim ring that may be removed and reversed to use as a handy disconnect tool.

Straight Stop	Size	Price & Quantity
compression outlet	1/2" CTS x 3/8" Compression	$10.09
	1/2" CTS x 1/4" Compression	$10.09
	1/2" CTS x 1/4" CTS (3/8" OD) (Sharkbite® outlet)	$10.09
	1/2" CTS x 1/2" Nominal (5/8" OD) Compression	$9.66

sharkbite outlet	1/2" CTS x 3/8" Compression Loose Key	$17.82
sharkbite outlet	1/2" CTS x 1/4" CTS (3/8" OD) Loose Key (Sharkbite® outlet)	$17.82

- OR - View Cart

Tee Stops

Sharkbite® tee stops allow you to tap into existing Copper, CPVC, or PEX lines to provide positive 1/4 turn shut off for additional fixtures like icemakers, humidifiers, dishwashers, and more. In a variety of configurations, you can add multiple fixtures to an existing line with ease.

Tee Stop	Size	Price & Quantity
compression outlet	1/2" CTS x 1/2" CTS x 1/4" Compression	$17.16
	1/2" CTS x 1/2" CTS x 3/8" Compression	$17.16
	1/2" CTS x 1/2" CTS x 1/4" CTS (3/8" OD - Sharkbite® outlet)	$26.40
	3/4" CTS x 3/4" CTS x 1/4" Compression	$29.04
	3/4" CTS x 3/4" CTS x 3/8" Compression	$18.88

- OR - View Cart

Stop Valve Connectors

Special female compression threads easily convert 3/8" or 1/4" compression outlets to Sharkbite® outlets for quick disassembly of pipe or fitting when needed.

Compression Stop Valve Connector - 1/4" CTS x 3/8" Compression = $4.25

Compression Stop Valve Connector - 1/4" CTS x 1/4" Compression = $3.43

- OR - View Cart

Stop Valve Tee Adapter

Need a dual outlet but a single outlet is installed? We have your simple solution. Special female compression threads convert one 3/8" compression outlet into two Sharkbite® outlets. Now you can supply water to two sinks or to a sink and a toilet or any other combination of fixtures.

Compression Stop Valve Tee Adapter - 1/4" CTS x 1/4" CTS x 3/8" Compression = $11.55

- OR - View Cart

Tube Stop Valve Tee Adapter

Two is better than one! Slightly different version of the fitting above. The male tube end fits directly into 3/8" compression stop outlet or 1/4" CTS Sharkbite® outlet to create two outlets instead of one.

Tube Stop Valve Tee Adapter - 1/4" CTS x 1/4" CTS x 1/4" CTS = $7.94

- OR - View Cart

Dual Tee Stop Valve Adapter

Stop valves can attach directly to the male tube ends with out the need to cut extra pipe. Use when only one stub out from the wall is present but two stop valves are desired.

Dual Tee Stop Valve Adapter - 1/2" CTS x 1/2" CTS x 1/2" CTS = $8.37

- OR - View Cart

Faucet Supply Kits

These faucet kits provide speed and convenience to the last phase of your plumbing projects. They are not only easy to install but allow you to make your own lengths of supply tubing as needed. Each faucet supply kit includes 2 each angle stop valves, 2 each faucet connectors, and 10 feet of 1/4" CTS PEX tubing.

Faucet Kit	Size	Price & Quantity
faucet kit with angle stops	Angle Stops - Included	$27.89

- OR - View Cart

Threaded Faucet Connector

Female threads screw-on directly to standard 1/2" faucet shanks permitting conversion to Sharkbite® fitting for easy Copper, CPVC or PEX piping connection.

Threaded Faucet Connector - 1/4" CTS x 1/2" CTS = $4.72

- OR - View Cart

Icemaker Supply Kit

These faucet kits provide speed and convenience when setting up a home or business icemaker. They are not only easy to install but allow you to make your own lengths of supply tubing as needed. Each faucet supply kit includes one SharkBite icemaker fitting, one 1/4 turn angle stop, one service slip tee adapter, 1/4" and 1/2" disconnector clips, and 10 feet of 1/4" CTS PEX tubing.

Faucet Kit	Size	Price & Quantity
	Icemaker fitting 1/4" (3/8" OD) x 1/4" comp Angle stop 1/2" x 1/4" (3/8" OD) Slip tee adapter 1/2" x 1/2" x 1/2"	$42.90

- OR - View Cart

Toilet Supply Kits

Simplify the finish phase of your plumbing or remodel project with these quick and easy to install toilet kits. Each toilet kit includes 1 each 1/4 turn straight or angled stop, 1 each toilet connector, and 5 feet 1/4" CTS PEX tubing for your own custom supply lengths.

Faucet Kit	Size	Price & Quantity
toilet kit with angle stop	Angle Stop - Included	$16.30

- OR - View Cart

Toilet Connector

Female ballcock threads screw directly onto fill valve (ballcock) shanks permitting conversion to Sharkbite® fitting for easy Copper, CPVC or PEX piping connection.

Toilet Connector - 1/4" CTS x 7/8" Ballcock Threads = $4.72

- OR - View Cart

Toilet Elbow Connector

Unique 90° angle toilet connector for use in close quarters or unusual supply tube configurations where normal access may be limited. Female ballcock threads screw directly onto standard fill valve (ballcock) shanks permitting conversion to Sharkbite® fitting for easy Copper, CPVC or PEX piping connection.

Toilet Elbow Connector - 1/4" CTS x 7/8" Ballcock Threads = $3.73

- OR - View Cart

Water Hammer Arrestors

Water Hammer Arrestors with SharkBite® Connections

Water lines that thump, bang or make a hammering noise inside the wall are all symptoms of water hammer. These symptoms are often caused by quickly closing valves, loose pipes, or worn out valve washers. Now you can quickly and conveniently add a water hammer arrestor to Copper, CPVC or PEX piping anywhere in your plumbing system to reduce the annoying effects of water hammer.

Water Hammer Arrestor	Size	Price & Quantity
	1/2" CTS - Residential	$44.22
	3/4" CTS - Residential	$53.46

	1/2" CTS - Commercial	$44.22
	1" CTS - Commercial	$109.56

- OR - View Cart

Radiant Fittings

Fittings for hydronic radiant heating piping not exceeding 200°F

Can be used with Glycol concentration up to 100%

Join copper, CPVC or PEX pipe in any combination

Certified to maximum 200 PSI and 200°F (93°C)
Minimum working temperature: 33°F

Use with hard drawn copper types K, L, and M - Not for use with soft copper tubing

NON-POTABLE WATER APPLICATIONS

5/8" CTS = 5/8" nominal inside diameter which is 3/4" outsize diameter piping.
3/4" CTS = 3/4" nominal inside diameter which is 7/8" outside diameter piping

Description	Size	Price & Quantity
COUPLINGS	5/8" CTS x 5/8" CTS	$6.15
90° ELBOWS	5/8" CTS x 5/8" CTS	$10.07
REDUCING MIPT ADAPTER	5/8" CTS x 3/4" MIPT	$7.91
TEE	5/8" CTS x 5/8" CTS x 5/8" CTS	$14.10
END STOP	5/8" CTS	$8.60

Order 3, 6, 9, or more of the same item for additional savings!

Pricing discounts will show up in your shopping cart

- OR - View Cart

SharkBite® Contractor's Kit

All of the most common SharkBite® fittings and tools in one handy kit

This handy carrying case is included
with the contractor kit!

Includes 2 Each

1/2" straight coupling
3/4" straight coupling
3/4" x 1/2" reducing coupling
1/2" female connector
3/4" female connector
1/2" male connector
3/4" male connector
1/2" elbow
3/4" elbow

Includes 1 Each

1/2" tee
3/4" tee
1/2" end cap
3/4" end cap
1/2" demount clip
3/4" demount clip
1/2" disconnect tongs
3/4" disconnect tongs
depth & de-burr tool

SharkBite® Pipe Repair Contractors Kit with Carrying Case = $247.50

SharkBite® Contractors Carrying Case ONLY (no tools/fittings included) = $39.47

- OR - View Cart

Tools for Installing & Disconnecting SharkBite® Fittings

SharkBite® Demount (Disconnect) Clips & Tongs

Description	Size	Price & Quantity
	1/4"	$1.27
	3/8"	$1.27
	1/2"	$1.27
	5/8"	$1.27
	3/4"	$1.27
	1"	$1.27

	1/2"	$6.44
	3/4"	$6.44
	1"	$6.44

- OR - View Cart

SharkBite® Depth & De-Burr Tool

De-burr & mark proper pipe depth for 1/4", 3/8", 1/2", 5/8", 3/4", and 1" copper pipe

View depth & de-burr tool instructions

SharkBite® depth & de burr tool for 1/4", 3/8", 1/2", 5/8", 3/4", and 1" copper pipe = $19.80

- OR - View Cart

Professional Plumber's Tubing Cutters

Product	Description	Price & Quantity
	Quick release tubing cutter - for 1/4" - 2-1/2" OD metal - includes cutting wheel	$20.98
	Soft pipe tubing cutter - for PEX and CPVC - includes blade (PVC handle)	$10.68
	Replacement blade only	$5.59

Order 100 or more of the soft pipe tubing cutter for additional savings!

Pricing discounts will show up in your shopping cart

- OR - View Cart

Thread Sealants (for IPS threads)

Description	Price & Quantity
PTFE thread sealing tape 3.5 Mil thick Density: 0.4	1/2" x 260" roll	$0.59
PTFE thread sealing tape 3.5 Mil thick Density: 0.4	1/2" x 520" roll	$1.03	Enter a quantity and
GRAY PTFE thread sealing tape 4 Mil THICK Density: 1.2 1/2" x 260" roll Proudly made in the USA		$1.73	Enter a quantity and
1 oz. Great White^™ Basic Pipe Joint Compound Small, convenient tube Great for most plastics and metals		$2.18	Enter a quantity and
4 oz. High Quality TU-555 Pipe Joint Compound Available in larger sizes, too Great for most plastics and metals *Order 12, 24 or 48 of this item for additional savings!* Pricing discounts will show up in your shopping cart.		$7.65	Enter a quantity and

To ensure our customers receive fresh products, TU-555 pipe joint compounds are non-returnable.

- OR - View Cart

Related Items & Accessories

SharkBite Fittings

Braided Stainless Flex Lines Gas line

Gas Connectors

Rigid Copper Pipe

Copper Tubing CPVC elbow

CPVC Fittings Lead-free solder

Solder for Potable Water Systems Brass compression elbow

Brass Compression Fittings

SharkBite® Specialty Connectors Sizing Guide

To determine what size SharkBite® connection you need, measure the OD of your copper, CPVC, or PEX pipe and compare to the Pipe OD Size listed below.

Nominal Size of Fitting	Nominal Size of Pipe	Pipe OD Size	Pipe Insertion Depth
1/4" CTS	1/4" CTS	3/8"	13/16"
1/2" CTS	1/2" CTS	5/8"	15/16"
3/4" CTS	3/4" CTS	7/8"	1-1/8"
1" CTS	1" CTS	1-1/8"	1-5/16"

Frequently Asked Questions

Q. "What is the SharkBite® system and how does it work?"
A. The SharkBite® system increases ease of use while decreasing the time and effort needed to connect water distribution pipe. The pipe is inserted into the fitting and held in place by several metal "teeth" and a durable grab ring. The pipe then passes through a specially formulated O-ring that compresses between the wall of the fitting and the tube to secure the joint. The joint can be disassembled only with a SharkBite® demount clip or tong.

How to Replace a Standard Hose Bibb

Q. "Do I need a stiffener to use SharkBite® connectors with PEX?"
A. An integral PEX stiffener is not usually needed when using SharkBite® since they come equipped with an integrated Tube Support Liner that effectively supports the PEX tubing to ensure the O-ring seals correctly. However, please be sure to check local codes as they might have different requirements. Additionally, note that the Tube Support Liner is not required when using SharkBite® products with CPVC and copper, and can easily be removed if preferred or required by local code.

Q. "Can I use SharkBite® fittings with soft copper tubing or rolled copper?"
A. No. Even though these SharkBite® fittings are remarkably innovative, they won't seal properly with soft or rolled copper and are for use only with hard drawn copper Types K, L, and M.

return to top ↑