Price Pfister Replacement Parts
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
PlumbingSupply.com
® is your source for faucet repair parts for Price Pfister,
Delta,
Moen,
Valley and many other plumbing-related products.
Individual Repair Parts Pages For Price Pfister
Click on any link below for replacement parts for Price Pfister faucets
Please Note: Price Pfister has discontinued some of their replacement parts over the years.
You can find a list of these discontinued items on our page.
Replacement Parts for Price Pfister
#910-030
#910-043
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#920-202A - Chrome
#920-532S - Stainless
#920-217J -Brushed Nickel
Please note: Due to low-flow regulations, these replacement spray heads cannot be shipped to California.
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#930-130
#931-720
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#940-060A
#940-110
#940-170
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#941-080
#941-160A
#941-320AP
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#949-060
#949-150
#949-333
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#950-040
#950-180
#950-370
Please note: Due to low-flow regulations, these replacement spray heads cannot be shipped to California.
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#951-010
#951-560
Please note: Due to low-flow regulations, these replacement spray heads cannot be shipped to California.
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#960-130
#960-180
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#962-042
#962-060A
#962-240
Our Price Pfister repair parts are genuine replacement parts except where noted as "will fit" replacement parts.
#970-120
#970-500
#970-730
Price Pfister Tub/Shower Rebuild Kits
Image |
Description |
Finish |
Price & Quantity |
Single Handle Trim Kit Only |
|
"Will-Fit" Price Pfister Avante - Includes Avante octagonal flange in chrome finish, round acrylic handle with chrome finish button insert and handle screw, and two escutcheon (flange) screws - Note: Replacement stem cartridge sold separately |
Chrome |
$49.73 |
Enter a quantity and
|
Two Handle Tub & Shower Rebuild and Trim Kits |
|
One-Piece Escutcheon/Sleeve "Will-Fit" Verve - Includes two Verve handles, two handle screws, one hot handle button, one cold handle button, two escutcheon sleeves, one hot stem, one cold stem, two cap thread gaskets, and two O-rings |
Chrome |
$42.63 |
Enter a quantity and
|
|
Two-Piece Escutcheon & Sleeve "Will-Fit" Verve - Includes two Verve handles, two handle screws, one hot handle button, one cold handle button, two escutcheons, two sleeves, one hot stem, one cold stem, two cap thread gaskets, and two O-rings |
Chrome |
$26.46 |
Enter a quantity and
|
|
Two-Piece Escutcheon & Sleeve "Will-Fit" Windsor Includes two Windsor acrylic handles, two handle screws, one hot handle button, one cold handle button, two escutcheons, two sleeves, one hot stem, one cold stem, two cap thread gaskets, and two O-rings |
Chrome |
$27.89 |
Enter a quantity and
|
Three Handle Tub & Shower Rebuild and Trim Kit |
|
One-Piece Escutcheon/Sleeve "Will-Fit" Verve - Includes three Verve handles, three handle screws, one each hot/cold/diverter buttons, three one piece escutcheon/sleeves, one each hot/cold/diverter stems, three cap thread gaskets, and three O-rings |
Chrome |
$64.96 |
Enter a quantity and
|
|
One-Piece Escutcheon/Sleeve "Will-Fit" Windsor - Includes three Windsor acrylic handles, three handle screws, one each hot/cold/diverter buttons, three escutcheon sleeves, one each hot/cold/diverter stems, three cap thread gaskets, and three O-rings |
Chrome |
$66.98 |
Enter a quantity and
|
|
Two-Piece Escutcheon & Sleeve "Will-Fit" Verve - Includes three Verve handles, three handle screws, one each hot/cold/diverter buttons, three escutcheons, three sleeves, one each hot/cold/diverter stems, three cap thread gaskets, and three O-rings |
Chrome |
$50.49 |
Enter a quantity and
|
|
Two-Piece Escutcheon & Sleeve "Will-Fit" Windsor Includes three Windsor acrylic handles, three handle screws, one each hot/cold/diverter buttons, three escutcheons, three sleeves, one each hot/cold/diverter stems, three cap thread gaskets, and three O-rings |
Chrome |
$40.57 |
Enter a quantity and
|
Discontinued Price Pfister Replacement Parts
Part # |
Item Description |
900-022 |
Cartridge |
900-561 |
1/2" tee For Widespread Faucet |
910-661 |
Pink Stem Diverter - Replaced by 910-662 |
920-091A |
Cast Widespread Spout - Chrome |
920-181A |
8" Tubular Laundry Spout Without Aerator - Chrome |
920-182A |
8" Tubular Spout Without Aerator - Chrome |
920-183A |
8" Tubular Spout Without Aerator - Chrome |
920-204A |
8" Spout Assembly - Chrome |
920-206A |
8" Spout Assembly - Chrome |
920-221A |
Goose Neck Spout Without Aerator - Chrome |
920-231A |
8" Tubular Spout Assembly - Chrome |
920-232A |
8" Tubular Spout Assembly - Chrome |
920-331A |
Cast Spout Assembly Without Aerator - Chrome |
931-010 |
Valve Retainer Bracket |
940-042A |
Single Lever Handle - Chrome |
940-062N |
Small Marquis Handle Set - Smoke |
940-330A |
Flowmatic Lever Handle Only - Chrome |
940-404 |
Small Windsor Handle |
940-482A |
Handle Cap - Chrome |
940-720 |
Acrylic Handle - Clear |
940-730E |
Small Windsor Acrylic Handle - Smoke |
940-740N |
Large Windsor Acrylic Handle - Smoke |
940-883A |
French Lever Handle - Chrome |
940-977 |
Loop Handle - Chrome |
940-994 |
Lever Handle Insert |
940-997 |
Lever Handle - Chrome |
941-024A |
Dome Cap - Chrome |
941-110A |
Button - Chrome |
941-330N |
Windsor Hot Button - Antique Brass |
941-320V |
Metal Windsor Cold Button ONLY - Polished Brass |
941-040 |
Crown Imperial Diverter Button |
941-340A |
Metal Windsor Diverter Button - Chrome |
941-409V |
Acrylic Index Button w/Insert - Polished Brass |
Part # |
Item Description |
941-410 |
Pop-Up Nut |
941-478V |
Index Button - Polished Brass |
941-960V |
Handle Button - Polished Brass |
941-652 |
6" Horizontal Pop-Up Rod with Nut & Clip |
941-700W |
Bonnet Cap - White |
949-306 |
Handle Insert - Blue ONLY |
949-409A |
Plain Insert - Chrome - Replaced by 941-409A |
951-580 |
Spout Packing |
960-022A |
Wall Flange - Chrome |
960-024A |
Wall Flange - Chrome |
960-081A |
Escutcheon for Screw Driver Stops - Chrome |
960-160N |
Flange - Antique Brass |
960-330A |
Pop-Up Flange - Chrome |
960-330N |
Pop-Up Flange - Antique Brass |
960-341A |
Two-Hole Overflow Plate - Chrome |
960-601Z |
Wall Flange & Washer - Oil Rubbed Bronze |
971-250 |
Pressure Balance Stem Assembly - Genuine Replacement Part
- for use with # 974-291 Balancing Cartridge - Replaced by 974-042 Retrofit Kit |
971-503 |
Screw |
971-966 |
Screw |
972-600N |
Cast Bathtub Stopper - Antique Brass |
972-691A |
Pop-Up Stopper - Chrome |
972-691N |
Lavatory Stopper - Antique Brass |
974-090 |
Bathroom Base Plate |
974-170 |
Ceramic Cartridge |
974-340 |
Bathroom Base Plate Gasket |
974-371A |
Avante Sleeve Only - Chrome |
974-371N |
Avante Stem Extension Sleeve - Antique Brass |
974-505 |
Cartridge with Vacuum Breaker Replaced by 974-035 - replaces #974-570 for faucets installed before 2005. If your faucet was installed after 2010, use #974-074. |
SGL-LAPC |
Porcelain Cross Handle - Chrome |
SGL-LAPP |
Porcelain Cross Handle - Polished Brass |
Do we sell Price Pfister Faucets?
Sorry, we only sell Price Pfister parts.
Have a question about Price Pfister repairs? Try Plbg.com.
Need a Price Pfister part number? Try contacting P.P.. Their current address is shown at PlumbingNet.
Please note that some of the above faucet parts are not made by Price Pfister.
If you specifically desire PP made parts please contact us before ordering.
Related Items & Information
Faucet Repair Parts for Price Pfister
Frequently Asked Questions
Q. "I would like to convert my faucet to quarter turn cartridges. Can I do that?"
A. If your faucet has the older Hydroseal type cartridge 910-691 (hot) and 910-681 (cold) you can replace them with (2) of 910-900 for hot and cold (the rotation on this cartridge is reversible).
Q. "How does the #910-900 stem cartridge for Price Pfister work for both the hot and the cold side? What if your faucet has lever handles which need to turn opposite of each other?"
A. The #910-900 stem cartridge can be set to turn counterclockwise for the "hot" handle of your faucet or to turn clockwise for the "cold" handle of your faucet with a simple adjustment. When first removed from the package, the cartridge should be set to turn counterclockwise for hot. Please double check that the cartridge is indeed set this way before proceeding.
- STEP 1: Make sure the clear plastic cap is on the diverter end of the cartridge to hold the o-ring and diverter components inside the cartridge
- STEP 2: Remove the small, "square" metal C-ring from the base of the stem
- STEP 3: Pull off the ratchet ring and flip it over, placing it back on the stem
- STEP 4: Replace the C-ring
The stem will now be reversed and set to turn clockwise so it can be used on the cold side. Order this hot/cold ceramic cartridge.
Q. "What does 'will fit' mean?"
A. "Will Fit" is a term used to define an item that may or may not be made by the original manufacturer (OEM), but will function just like the original part.
Q. "What's the difference between the tub/shower kits for Verve and Windsor handles?"
A. The two-piece trim and rebuild kits have a straight sleeve and separate escutcheon designed to fit over externally threaded stems, while the one-piece kits have a flanged sleeve. The stems for these kits have a threaded nipple that fits inside the sleeve. The easiest way to tell which one you'll need is to look at your existing stems and choose the kit that matches your existing stems.
Q. "The replacement cartridges #910-0310 and 910-0320 I purchased to replace the discontinued 910-024 and 910-025 not only look different but do not fit my faucet. Are these the correct replacement parts?"
A. These replacement cartridges 910-0310 and 910-0320 are the correct parts. However, if these new cartridges look slightly different from the cartridges you have, then you will need to use your old brass retainer nut and remove the outer, larger white plastic portion of the new stem.
click any image below to view in greater detail
Step 1. Turn off your water and remove your old cartridge by turning the retainer counter-clockwise
Step 2. Disassemble old cartridge. Remove the brass retainer nut and save it. Discard the old internal stem and retainer washer
Step 3. Disassemble new cartridge. Remove outer large white plastic portion and discard. Keep the internal stem and new retainer washer.
Step 4. Reassemble with saved nut, new cartridge, and new retainer washer.
Step 5. Reinstall cartridge and tighten the brass retainer clockwise.
Customer Testimonials
"I have read some of the testimonials offered on your web site and I have to agree with them, you folks certainly perform above standard... Many thanks."
- Jeff Whooten, Goffstown, New Hampshire 03045-1610
"My 40-year-old Price Pfister faucet started leaking. Although Price Pfister offers a very helpful troubleshooting guide, their parts ordering site is hopeless. Then I found PlumbingSupply.com® . Three clicks led me to an excellent exploded diagram of my old faucet that clearly identified the parts and gave me a very convenient way to order these parts at the bottom of the page. PlumbingSupply.com® shipped the right parts quickly and I was completely satisfied. I would gladly recommend them to anyone who needs plumbing supplies.It seems silly to be so excited over plumbing, but you guys made it easy to rescue my 40-year-old Price Pfister faucet. Thanks again for your excellent service."
- Betty Smoot-Duncan, Edmonds, WA 98026-9281
"I seldom compliment vendors on their product, price, and service, but in this case I really want to do so. I have spent hours trying to find replacement handles that fit my 40 year old Price-Pfister lavatory faucet. You had the exact copy. They fit great, were shipped promptly, and the price was reasonable. In the future you will be the first place I go to for plumbing supplies. Keep on trucking."
- Louis Demelin, Burlington, MA 01803
"Received replacement tub drain handle. Works great. Thank you so much for a good business transaction/quick delivery. Appreciate the extra mile you folks go. Will pass the word her in Oregon... (I) am a very firm believer that praise should be directed to the proper circumstances, and this was one of them."
- Robert Ott, Toledo, Oregon 97391-9778
Please note that every customer testimonial shown on our pages has given us written permission to quote them. Our customer's privacy is very important to us so we will never give, share or sell contact information or e-mail addresses to anyone!
return to top ↑