PVC Hose Adapter - 3/4"MHT x 1/2"spigot

- +
$0.93
  • Polyvinyl chlroride (PVC) Hose Adapter - 3/4" MHT x 1/2" Spigot.
  • MHT is the abbreviation for male hose thread
  • Spigot means it is the same size as pipe and will fit into a PVC slip fitting like a coupling or elbow.
  • The 3/4" MHT side of the adapter allows a female hose thread to be threaded on to it.
  • The 1/2" Spigot side of the adapter will fit into a 1/2" PVC slip fitting (coupling, tee, elbow etc.).
  • When properly glued, a 1/2" Schedule 40 Spigot adapter is suitable for potable water systems and will easily handle working pressures of 140 psi @ 73°F.
  • Please Note: Water pressures above 80 psi can damage residential water distribution systems.
  • PVC has exellent chemical and corrosion resistance.
  • PVC is approved for underground use, but not indoor distribution.
  • PVC is a viable alternative to copper, galvanized, or polyethylene, and is often the least expensive option.
  • PVC fittings should never be used for compressed air or gas systems.

Related Pages

CPVC flutes
How to Make
a CPVC Flute CPVC elbow
CPVC Fittings Wet tap saddles for PVC and ABS pipe
Wet Tap Saddles Quality Patio Misters
Quality Patio Misters PVC female hose adapter
PVC By Size Smart PVC check valve
PVC Check Valves PVC compression tee
PVC Compression Fittings pvc compression coupling
PVC Compression Couplings PVC pipe cutter
PVC Pipe Cutters PVC expansion coupling
PVC Expansion Couplings PVC cross fitting
PVC Fittings Black PVC nipple
PVC Nipples PVC fitting saver
PVC Fitting Savers PVC ball valve
PVC Valves Differences between PVC and CPVC
Differences Between PVC & CPVC Do you need PVC primer?
The Great PVC
Primer Debate
Copyright© 1995-2025 PlumbingSupply.com.
All Rights Reserved.