Single Bowl Stainless Steel Commercial Kitchen Sinks
NSF Listed with Coved Corners
by Griffin Products, Inc.
When looking for an NSF listed stainless steel commercial kitchen sink, look no further than those made by Griffin. With their focus on quality and decades of experience in stainless steel manufacturing, the stainless steel commercial style sinks Griffin constructs are designed to last a lifetime. In fact, these 16 gauge NSF listed sinks have a lifetime manufacturer's warranty! Even better, these sinks feature "True Gauge" construction techniques, which ensure that even the seams and corners are as substantial as the rest of the sink. Truly, you could not ask for a better sink!
Sabine Series 16 Gauge Single Bowl Coved Corner Commercial Sinks
These commercial sinks feature:
- Backsplash mounted swing spout faucet included
- Constructed of 16 gauge type 304 stainless steel for durability and superior corrosion resistance
- "True Gauge" construction means the gauge of the sink is not compromised in the corners and seams, but remains true throughout
- Full apron front so these sinks look great and clean easily
- 12" bowl depth in your choice of length and width
- Faucet holes are 1-1/4" diameter on 8" centers through the back plate
- Stainless Steel legs are included and feature adjustable bullet feet which allow for up to 5/8" for leveling
- Front to back leg rails for added stability (included with all sinks with bowls larger than 24" or drain boards 30" or larger)
- 3-1/2" drain is recessed and includes a basket strainer
- Drains are designed for 1-1/2" waste pipe connections
- 3/4" radius sink compartment contribute toward easier cleaning
- NSF listed under food equipment
- 10yr manufacturer's warranty
- Proudly made in the USA
We also offer Griffin two bowl and three bowl NSF listed commercial sinks
Single Compartment Stainless Steel Sinks Without Drainboards
16 Gauge Commercial Kitchen Sinks - 12" Bowl Depth
Backsplash Faucet and Drain Included
Due to size/weight and to ensure safe delivery, certain items ship by truck and have an additional shipping fee per freight item.
These commercial sinks have a standard lead time of two weeks to ship out
Single Compartment Sinks With Drainboards On Left Or Right
16 Gauge Commercial Sinks, 12" bowl depth
Backsplash Faucet and Drain Included
Single compartment commercial sink with left drain board
Single compartment commercial sink with right drain board
Due to size/weight and to ensure safe delivery, certain items ship by truck and have an additional shipping fee per freight item.
These commercial sinks have a standard lead time of two weeks to ship out
Single Compartment Stainless Steel Sinks With Dual Drainboards
16 Gauge Commercial Sinks - 12" Bowl Depth
Backsplash Faucet and Drain Included
Due to size/weight and to ensure safe delivery, certain items ship by truck and have an additional shipping fee per freight item.
These commercial sinks have a standard lead time of two weeks to ship
While the sinks and faucets featured here are manufactured in the USA, the other accessories may be imported or assembled in the USA from imported parts. If you need to know the country of origin of any item, please contact us.
Related Items & Accessories
Frequently Asked Questions
Q. "What type of faucet is designed to be used with this style of sink?"
A. There are special faucets that are specifically designed to be used with sinks that have a backsplash like these Griffin models; they're called, appropriately enough, backsplash faucets. Backsplash faucets are wall-mounted faucets that have a special male-threaded extension that's designed to go through the backsplash of the sink, allowing for easier hook-up to your incoming water supply. You can go to our "backsplash faucets" page by clicking our page.
Q. "Can I use the type of faucet that has a large riser with a spray-hose attached, like I've seen in restaurant kitchens?"
A. The type of faucet you're referring to is known as a "pre-rinse" faucet, and there are certainly pre-rinse faucets available (such as these pre-rinse faucets listed on our site) that can be used with these sinks. However, most pre-rinse faucets are designed to be mounted onto an actual wall and not through a sink's backsplash (unless otherwise stated in the faucet description), so you may need to use a special adapter kit, like the nipple kit we offer on our page. If your pre-rinse faucet has 1/2" female IPS inlets (like most do), these adapters should enable you to install your wall-mount pre-rinse faucets onto a sink with a backsplash.
Q. "I notice you also offer some similar sinks on your site that are described as having 'square corners'. What's the difference between 'square corners' and 'coved corners'?"
A. "Coved corners" are NSF ("National Sanitation Foundation") approved because the corners and angles of the sink's working area (where the horizontal drainboards meet the vertical backsplash, for instance) are rounded, allowing for easier and more complete cleaning. The sinks with squared corners have tight angles where the vertical and horizontal areas meet; they're still high quality sinks, but the squared corners can make it very difficult to clean any grime that might build up there (and so also prevents them from meeting NSF standards).
Q. "I'm installing my Griffin sink in my new business, and ease of maintenance is important to me. Should I choose coved corners or squared corners?"
A. Because the sinks with coved corners have rounded "seams", they're much easier to clean than the squared-corner models. Also, the coved-corners sinks are NSF-approved, whereas the squared-corner sinks are not; your local building codes may require your sink to be NSF-approved, so be sure to check with your city or county building inspectors or Building Development Department to confirm what is required in your area before you select your sink.
Q. "Do you have any tips on how I should take care of my stainless steel sink?"
A. We sure do! Just click our page for more information.
Please note: While we strive to ensure every product we label as "Made in the USA" really is 100% made in the USA, it is also important to understand that sometimes manufacturers make changes to their products, or for various reasons may receive components or materials that they would normally purchase domestically from an overseas supplier - and they don't necessarily let distributors (like us!) know that they've changed something about the product or where it is manufactured.
If you receive a product that PlumbingSupply.com® says is "Made in the USA" and the product states it was manufactured elsewhere, please contact us. We will happily replace or refund your purchase to your satisfaction.
