Commercial Roof Hydrants
by Woodford Mfg and Prier Products
These roof hydrants are available in mild climate or freezeless models and are designed for a secure installation on commercial roof surfaces. This product can be used for cleaning condenser coils and even such duties as cleaning windows. With these commercial roof hydrants, you no longer need to pull heavy hoses up ladders, thus, reducing the chance for injury.
click any image below to jump directly to that hydrant
Woodford Mild Climate Commercial Roof Hydrant
Shown: RHMC-MS
This mild climate roof hydrant features:
- Designed with commercial rooftops in mind, a rooftop hydrant can help prevent injury and increase efficiency by reducing long hose runs
- Provides ease of access to water for window washing, condenser coil cleaning, cooling towers, or green roofs
- For non-freezing mild climate areas
- Oval powder coated, die-cast aluminum handles for durability
- Includes dual check auto drain backflow preventer
- Optional mounting system allows the hydrant to be installed or easily removed at a later time
- Click for rough in guide for the RHMC-MS
Woodford Sanitary Freezeless Commercial Roof Hydrant
Shown: SRH-MS
This sanitary roof hydrant features:
- Designed for installation on commercial rooftops to provide a roof water source
- Allows secure access to water for window washing, condenser coil cleaning, or other water-related tasks
- Includes dual check auto drain backflow preventer
- Optional mounting system allows the hydrant to be installed or easily removed at a later time
- Click for rough in guide for the SRH-MS
Woodford Freezeless Commercial Roof Hydrants
Features:
- Model RHY2 with back flow preventer
- Model RHY1 without back flow preventer
- Boot covers well seal that tightens between hydrant support and casing
- Hydrant support for additional stability during bad weather
- Under-deck flange
- 1" N.P.T. Inlet
- View specifications sheet
Prier Flush Mount Roof Hydrant
Features:
- Flush design allows hose to run in 360°
- Mounts to any roof structual member (truss, I-beam, concrete roof, etc)
- 1-3/4" drill hole required through roof for mounting
- Bracket included for secure mounting
- Can be installed by a single person with standard tools
- Self-draining valve eliminates the possibility of freezing
- Removable operating key included to prevent unauthorized usage of hydrant
- Integral vacuum breaker/backflow preventer
- Flow is rated at 19 gpm at 25psi
- Adjustable bracket accomodates roof angles up to 4/12
- View dimensions and parts diagram
- Proudly made in the USA
Prier Post Mount Roof Hydrant
Features:
- Freezeless anti-siphon hydrant stands 30" above the roof for easy hose access
- Heavy duty cast iron head features a bucket hook on spout and lockable lever handle
- Mounts to any roof structual member (truss, I-beam, concrete roof, etc)
- 1-3/4" drill hole required through roof for mounting
- Bracket included for secure mounting
- Can be installed by a single person with standard tools
- Triple seal EPDM stopper for long wear life
- Self-draining valve eliminates the possibility of freezing
- Removable operating key included to prevent unauthorized usage of hydrant
- Integral vacuum breaker/backflow preventer
- Adjustable flow rate
- Adjustable bracket accomodates roof angles up to 4/12
- View dimensions and parts diagram
- Proudly made in the USA
| Model |
Description |
Price & Quantity |
| P-RH2 |
Post Mount Roof Hydrant
- Includes hydrant, mounting bracket, and operating key |
$929.27 |
Enter a quantity and
|
| Replacement Parts |
| P-RMB |
Complete Mounting Bracket |
$549.48 |
Enter a quantity and
|
| 301-7003 |
Cast Iron Handle |
$26.70 |
Enter a quantity and
|
| 301-7001 |
Cast Iron Hydrant Head |
$97.97 |
Enter a quantity and
|
| 304-7001 |
Draw Straps (PAIR) |
$8.97 |
Enter a quantity and
|
| 314-0009 |
Stainless Steel Nylon Hex Nut |
$0.45 |
Enter a quantity and
|
| 314-7001 |
Connector Nut - Adjustable |
$13.28 |
Enter a quantity and
|
| 314-7002 |
Upper Rod - Stainless Steel |
$11.43 |
Enter a quantity and
|
| 336-0008 |
Packing - EPDM |
$3.13 |
Enter a quantity and
|
| 310-7003 |
Seal Adapter - Brass |
$13.88 |
Enter a quantity and
|
| 336-0001 |
O-Ring - EPDM |
$3.32 |
Enter a quantity and
|
| 310-7001 |
Seal Sleeve - Brass |
$10.34 |
Enter a quantity and
|
| P-004CP |
Double Check Vacuum Breaker (ASSE 1052) |
$27.79 |
Enter a quantity and
|
| P-260KT-802 |
Stopper Repair Kit
- Includes (1 each) o-ring and stopper, and (2) spring pins |
$17.05 |
Enter a quantity and
|
| P-260KT-807 |
Overhaul Kit
- Includes (1 each) pair draw straps, connector nut, valve stem cap, packing, washer, o-ring, stopper, and (2) spring pins |
$54.58 |
Enter a quantity and
|
Prier Mild Climate Roof Hydrant
Features:
- Designed for mild climates, this roof hydrant is ideal for locations that do not need freeze-protected faucets
- Designed with commercial sill faucet on stainless steel post for easy access
- Mounts to any roof structual member (truss, I-beam, concrete roof, etc)
- 1-3/4" drill hole required through roof for mounting
- Bracket included for secure mounting
- Can be installed by a single person with standard tools
- Removable operating key included to prevent unauthorized usage of hydrant
- Integral vacuum breaker/backflow preventer
- Adjustable flow rate
- Adjustable bracket accomodates roof angles up to 4/12
- View dimensions and parts diagram
- Proudly made in the USA
Related Items & Accessories
Frequently Asked Questions
Q. "What is EDPM?"
A. EDPM stands for ethylene propylene diene monomer (M-class) rubber. The main properties of EPDM are heat, ozone and weather resistance, making it an excellent material for seals that may be exposed to the elements or see a wide variance in temperatures. In fact, EPDM can withstand temperatures ranging from approximately -50°F to 300°F. EPDM is used for weatherstripping in vehicles, restaurant cold-room doors and refrigerators, hydrant and valve seals, roofing waterproofing, and pond liners, to name just a few.
Please note: While we strive to ensure every product we label as "Made in the USA" really is 100% made in the USA, it is also important to understand that sometimes manufacturers make changes to their products, or for various reasons may receive components or materials that they would normally purchase domestically from an overseas supplier - and they don't necessarily let distributors (like us!) know that they've changed something about the product or where it is manufactured.
If you receive a product that PlumbingSupply.com® says is "Made in the USA" and the product states it was manufactured elsewhere, please contact us. We will happily replace or refund your purchase to your satisfaction.
return to top ↑
