Shower Components

This type of diverter is typically used to add a handshower or other device to an existing shower installation without altering the in-wall plumbing. With the 1/2" IPS connections, this diverter can be installed in-line between your existing shower arm and showerhead, providing an extra outlet. Once installed, simply press the button to divert the water from the showerhead to the handheld shower or other device.

Designed to be used with vintage style faucets between the faucet and riser, this diverter allows you to add a handshower or other accessory to your existing Victorian shower setup. The diverter installs directly on your faucet using the 3/4" IPS sized nut. The top outlet accepts 5/8" OD sized shower riser pipe and uses a rubber compression sleeve for easy installation. The side outlet is 1/2" IPS, which fits most standard handshower hoses.

These swivel mounts are typically used when you want to add a swivel feature to a hand shower or replace the original plastic mounting hardware. When installed on an existing shower arm and used in conjunction with a DK172A installed on a handshower, you create a sturdy all metal mount for your hand shower. Standard 1/2" IPS connections are used on this model.

Brass swivel connectors are most often used in hand shower application. They mount to a pin mount wall bracket (such as the DK171A shown below) or pin mount slide bar. They can also be used in conjunction with the DK479A, shown above. 1/2" IPS connection allow you to connect a hand shower hose to the male side and a hand shower to the female side. The free spinning female connection reduces tangling of the hose.

These wall brackets are designed to be used with a pin mount connector and allow an attachment to swivel. Install on your shower wall at a different height than your standard showerhead for a child-height shower or for the convenience of those who sit while showering. Simple two hole mounting allows this bracket to be mounted anywhere anchors can be set.

If you want to improve the look of your hand shower system this all brass supply elbow may be perfect. Designed to replace an existing shower arm (a short nipple may be needed), this supply elbow reduces stress on connections by allowing them to lay straight down when not in use. As a bonus, it looks great and features standard 1/2" IPS connections to fit most standard handshower hoses.

The classic supply elbow provides the designer look with vintage appeal. Ideal for adding a handshower to a custom shower system, or even simply replacing a standard shower arm so a more convenient mounting location can be installed. All brass construction and 1/2" IPS connections are standard on this unit.

If you want to update the look of your old fashioned shower system, these porcelain-grip telephone-style hand showers are great. Available in a variety of finishes and featuring 1/2" IPS male threads, they will work for many applications. Victorian style hand showers are often attached, via their hose (sold separately below), either directly to the vintage-style faucet or to a diverter between the faucet and riser. If you also wish to add a cradle to hold these lovely handshowers, they rest perfectly in both the ED1050 and ED1010 hand shower cradles.

Better than a standard shower hose, these double interlock hoses are both durable and appealing. The double interlock allows for superior flexibility and strength. Available in a variety of designer finishes, the hoses are 59" in overall length and feature 1/2" IPS female nuts which is compatible with most hand held showers.

Elements of Design offers a beautiful line of clawfoot tub faucets and enclosures. We offer some replacement connections and supports to help keep your shower enclosure as lovely and functional as the day it was installed. For complete faucet and enclosure kits, look on our page.

This shower enclosure support is 12 inches long and is designed to support 3/4" OD curtain rods. It includes two screws and anchors for the wall flange, as well as set screws to help hold the enclosure tubing in place. This support is great as an additional support for an existing enclosure or as a replacement for a damaged support. Offered in a variety of finishes, this curtain rail support will blend beautifully with many bathroom styles.

This shower ring connector is typically used for adding a wall support to a 3/4" OD shower curtain ring. Designed with set screws to help secure the tubing, this connector is durably plated in your choice of four finishes.

This style of shower ring connector is designed to connect a wall support to the curtain ring and the shower riser at the same time. The center hole acts as a support for the 5/8" OD shower riser, while the ends to either side firmly hold the 3/4" OD shower curtain ring with set screws for additional security.

This handshower holder is designed to be used with the ED1020 decorative hand shower. This unit will attach to a 5/8" diameter riser and is available in all the same finishes as the hand shower.

Similar to the #ED1050 the leg tub cradle is designed to work with the ED1020 hand shower. This model will attach to the top outlet on most vintage style leg tub faucets and allow a shower hose to be attached to the outlet while providing a convenient place to rest the handshower itself. Available in four finishes, this unit features 1/2" IPS connections. The 1/2" female slip joint nut allows for easy installation or removal.

These brass adapters are typically used to mount the EOD vintage style faucet body to the tub or wall (depending on the style of faucet). Typically these mounting pieces are included with the faucet body, but we offer these replacements "just in case."