Sensor Operated Hand Wash Sinks
by Aero
Aero Mfg. is a leader in the commercial grade stainless steel sink industry. PlumbingSupply.com
® is proud to offer this line of sensor operated hand wash sinks. For these and many other
sinks, you'll find what you need at PlumbingSupply.com
®.
Model HSFE
- Includes basket and electronic faucet
- Constructed of 18 gauge #304 Stainless Steel
- Dimensions —
BOWL: 10" width & 14" length
UNIT: 15" width & 17" length
Model HSFE = $1,593.27
Model HSDE
- Includes basket, P-trap, overflow and electronic faucet
- Constructed of 18 gauge #304 Stainless Steel
- Dimensions —
BOWL: 10" width & 14" length
UNIT: 15" width & 17" length
Model HSDE = $1,677.99
Under Sink Guardian® Thermostatic Tempering Valves
These thermostatic tempering valves are designed to provide accurate temperature control (±3°F) and limit hot water to prevent scalding for commercial, institutional, and residential applications. Installs easily between the stop valves and faucet, these valves include a tamper resistant locking cap to prevent accidental mis-adjustment. The included cap allows for three port applications and makes these ideal for sensor operated faucets. These tempering valves also include dual check valves to protect against cross-flow and 40 mesh stainless steel integral screens to filter out debris.
Specifications:
- 3/8" compression connections
- Hot inlet temperature: 120°F - 180°F
- Cold inlet temperature: 39°F - 80°F
- Minimum inlet temperature differential: 5°F
- Temperature out: 80°F - 120°F
- Max pressure: 150psi
- Pressure differential between hot and cold inlet supplies must be less than 20% between them
- ASSE 1016 & ASSE 1070 listed
- CSA B-125 certified
- Compliant with Federal Safe Drinking Water Act standards
- Please note: These valves are NOT made in the USA.
Related Items & Accessories
Frequently Asked Questions
Q. "Where are these sinks made?"
A. Aero sinks are proudly made in the United States.
Q. "What does "NSF Approved" or "NSF Listed" mean?"
A. When a product is NSF certified or listed means that NSF has reviewed the Product, most often through a sampling of the Product; they have determined that the Product complies with the current "Standard"; and has conducted or will conduct audits to determine whether the Product continues to comply with the Standard.
Q. "Are these sinks NSF approved?"
A. Yes, all of the sinks shown on this page are NSF approved.
Q. "Are these sinks considered "green" or "eco-friendly?"
A. In order to lessen the impact on the environment, these sinks are made of up to 70 percent recycled materials.
Please note: While we strive to ensure every product we label as "Made in the USA" really is 100% made in the USA, it is also important to understand that sometimes manufacturers make changes to their products, or for various reasons may receive components or materials that they would normally purchase domestically from an overseas supplier - and they don't necessarily let distributors (like us!) know that they've changed something about the product or where it is manufactured.
If you receive a product that PlumbingSupply.com® says is "Made in the USA" and the product states it was manufactured elsewhere, please contact us. We will happily replace or refund your purchase to your satisfaction.
return to top ↑