General Wire Jet-Set™ Products
JM-1000 Electric Water Jet
The JM-1000 packs a mighty punch in a lightweight, compact design. The pump and motor are conveniently and safely housed in a lightweight, rugged diamond plate case that can be stored or transported in the smallest of spaces. The water jet system uses the steam of high pressure water that attacks the blockage and flushes it away. Clear blockages of grease, sand, and ice from 1-1/2" to 3" lines with ease and precision. The pulse action of this unit helps the hose slide around tight bends and pipe corners to help further it down the line and to help eliminate the clog. The built-in Water Sensor locates the moving water and automatically shuts off the motor if water is not flowing through the pump to help protect the unit from damage. General Wire has impressed with this powerful trifecta (lightweight, compact, and easy on the wallet) unit.
These electric water jets feature:
- Compact enough to easily store in your crowded work truck (24"L x 10.5"W x 11"H)
- At only 22 lbs. it is easy enough to carry with you on your drain clog adventures
- Heavy duty diamond plated case stands up to the abuse of everyday workloads
- Includes rubber feet on bottom of case to protect against damage to countertops
- Clears drain clogs from 1-1/2" to 3" lines
- Includes 1.2 HP motor with 13 amp w/3-wire Ground Fault Circuit Interrupter (GFCI)
- Generates 1500 psi at 1.4 gpm
Model |
Description |
Price & Quantity |
JM-1000 |
Basic Unit - (no hoses or nozzles) jet hoses sold separately |
$1,136.25 |
JM-1000-A |
Basic Unit + 30JH00 (30 ft. x 1/8") Hose, JN-0 Nozzle Set, Water Supply Hose, Shut-Off Valve, Universal Faucet Adapter, and Threaded Faucet Adapter |
$1,349.10 |
JM-1000-B |
Basic Unit + 50JH00 (50 ft. x 1/8") Hose, JN-0 Nozzle Set, Water Supply Hose, Shut-Off Valve, Universal Faucet Adapter, and Threaded Faucet Adapter |
$1,385.65 |
JM-1450 Electric Jet
The JM-1450 has great cleaning power in a compact design. You can take this jet into some really tight spaces. And if you want to put it into a car trunk, you can take off the reel in seconds and load the machine in two pieces. The telescoping handle on the JM-1450 makes it easy to roll the machine to and from the job, and then slides out of your way when you're on the job. A low center of gravity keeps the JM-1450 solidly in place while you work. The JM-1450 is powered by a 1-1/2 hp (13 amp) sealed motor with an in-line Ground Fault Circuit Interrupter. The dual capacitor motor is totally enclosed, so water won't harm it or pose a shock hazard. A 1500 psi, 1.7 GPM triplex pump is equipped with Vibra-pulse® to work the hose around tight bends in small lines. This unique feature allows the flow rate to remain the same whether Vibra-pulse® is on or off. Safety features include a thermal relief valve to protect the pump from heat damage, as well as a back-flow check valve and inlet filter.
These electric jets feature:
- Includes 1-1/2 HP motor with GFI (115 volt/13 amp)
- 1500 psi/1.7 gpm triplex pump with Vibra-pulse®
- 150 ft. capacity hose reel
- 2 semi-pneumatic tires
- Convenient power switch location for easy operation
- Rounded handle for comfortable use
- Pressure gauge and rubber gloves
Due to size/weight and to ensure safe delivery, certain items ship by truck and have an additional shipping fee per freight item.
JM-2900 Gas Jet
The JM-2900 is an economical alternative to the JM-3000. It's lighter and more maneuverable, yet maintains the same pressure and flow rate as the JM-3000. It's driven by an 389cc engine connected directly to a 3000 psi, 4 GPM triplex pump with the same bypass as the larger units. A 200 ft. capacity hose reel with drag brake, reel lock and brass swivel is mounted on a heavy duty frame with four pneumatic tires making it simple to move from job to job. Safety features include a thermal relief valve, along with a back-flow check valve and inlet filter.
These gas jets feature:
- 389cc engine
- 3000 psi/4 gpm triplex pump with Vibra-pulse®
- 200 ft. capacity hose reel
- 2 pneumatic tires
- Pressure gauge and rubber gloves
Due to size/weight and to ensure safe delivery, certain items ship by truck and have an additional shipping fee per freight item.
JM-3000 Gas Jet
The JM-3000 is great for large lines and long runs, as well as small lines. And it's much more powerful than smaller jets. A 3000 psi, 4 GPM triplex pump with Vibra-pulse® on demand drives the hose easily around tight bends and down long runs. The pump is powered by a reliable 389cc engine attached to a 2 to 1 gear reducer to extend the life of the pump. The frame has been specially designed for optimum maneuverability and the entire machine can be tipped back into it's rear wheels, making it easy to move into place; in addition the engine is located in the rear of the machine, providing balance.
These gas jets feature:
- 389cc Electric start engine
- 3000 psi/4 gpm triplex pump with Vibra-pulse®
- 300 ft. capacity hose reel
- 4 pneumatic tires
- Spray wand with trigger
- Pressure gauge, rubber gloves and tool box
Due to size/weight and to ensure safe delivery, certain items ship by truck and have an additional shipping fee per freight item.
JM-3080 High Flow Gas Jet
The JM-3080 gives you the increased cleaning power of 8 gallons of flow per minute without risking pump damage if your water supply can't match the pump demand. A 12 gallon buffer tank mounted on the frame gives you the safety margin you need when using a high-flow water jet to clear larger and more difficult lines. The tank extends the operating time as well. A 614cc engine with electric start drives a 3000 psi, 8 gpm pump through a 2 to 1 gear reducer to extend pump life. The pump features Vibra-pulse® on demand, to help propel the hose on long runs and around tight bends.
These gas jets feature:
- 614cc engine with Electric Start (battery sold separately) and low oil shut off
- 3000 psi/8 gpm pump with Vibra-pulse®
- 300 ft. capacity, removable hose reel
- 12 gallon holding tank and spray wand
- 4 pneumatic tires
- Rear engine placement provides better balance
- Please note that a 12V lawn tractor battery is required for these units to start. Batteries can be purchased at your local hardware store
Due to size/weight and to ensure safe delivery, certain items ship by truck and have an additional shipping fee per freight item.
Jet Hoses
Tough high pressure jetting hose comes in a variety of lengths and diameters. Use 1/2" ID hose for main lines and long runs 4" through 12" in diameter at distances of up to 400 ft. Use the 3/8" ID hose for clean outs, 4" through 8" floor drains, and septic lines at distances up to 300 ft. With the 1/4" ID hose, you can clear 2" through 4" lines up to 200 ft. away.
Model |
Description |
Price & Quantity |
1/8"ID Jet Hose - working pressure: 3,000 lbs - minimum burst rate: 10,000 PSI |
30JH00 |
Jet Hose 30' x 1/8"ID with 1/8" NPT Male Fittings |
$75.25 |
50JH00 |
Jet Hose 50' x 1/8"ID with 1/8" NPT Male Fittings |
$126.19 |
75JH00 |
Jet Hose 75' x 1/8"ID with 1/8" NPT Male Fittings |
$189.85 |
1/4"ID Jet Hose - working pressure: 3,000 lbs - minimum burst rate: 12,000 PSI |
100JH1 |
Jet Hose 100' x 1/4"ID with 1/4" NPT Male Fittings |
$288.25 |
150JH1 |
Jet Hose 150' x 1/4"ID with 1/4" NPT Male Fittings |
$429.48 |
200JH1 |
Jet Hose 200' x 1/4"ID with 1/4" NPT Male Fittings |
$576.48 |
3/8"ID Jet Hose - working pressure: 3,600 lbs - minimum burst rate: 9,000 PSI |
100JH2 |
Jet Hose 100' x 3/8"ID with 3/8" NPT Male Fittings |
$328.76 |
115JH2 |
Jet Hose 115' x 3/8"ID with 3/8" NPT Male Fittings |
$373.91 |
200JH2 |
Jet Hose 200' x 3/8"ID with 3/8" NPT Male Fittings |
$645.94 |
250JH2 |
Jet Hose 250' x 3/8"ID with 3/8" NPT Male Fittings |
$815.68 |
300JH2 |
Jet Hose 300' x 3/8"ID with 3/8" NPT Male Fittings |
$1,038.37 |
1/2"ID Jet Hose - working pressure: 3,600 lbs - minimum burst rate: 9,000 PSI |
250JH3 |
Jet Hose 250' x 1/2"ID with 1/2" NPT Male Fittings |
$1,049.66 |
400JH3 |
Jet Hose 400' x 1/2"ID with 1/2" NPT Male Fittings |
$1,635.27 |
Frequently Asked Questions
Q. "Where are these types of jet cleaning machines normally used?"
A. General Wire builds machines for professional use and for maintenance in plants, buildings, schools, restaurants, and hotels. We also make machines for the rental industry, and the highest quality drain cleaning tools available for the hardware/home center market.
Q. "What is GFCI (Ground Fault Circuit Interrupter)?"
A. The GFCI is a piece of safety equipment which helps protect you from shock if a short circuit should occur. The GFCI should be tested before each use.
Q. "What is Vibra-pulse®?"
A. Vibra-pulse® breaks the initial tension between the surface of the hose and the walls of the pipe, thus helping the hose slide around tight bends and propel itself farther down the line. Vibra-pulse® increases the cleaning power of low pressure electric jetters, and is particularly useful in jetting around bends in small drains.
Q. "What types of stoppages water jet units used for?"
A. General's water jets are ideal for clearing soft stoppages and ice from drain lines. They use a stream of high pressure water that hits the stoppage and flushes it away. The thrust of the nozzle drives the hose down the line and gives you wall-to-wall pipe cleaning action. You'll find plenty of uses for it in restaurants, hotels, hospitals, shopping malls, factories, and septic systems.
Note: some of these jet set products are not in stock and will be shipped direct from the factory