Replacing or repairing your tub's drain/waste assembly is a snap with bathtub drain products made by Watco, offered by your source for drain products, PlumbingSupply.com®. Whether you need to install a new waste and overflow, or you want to update the look of your old one, we have just what you need. From assemblies, to trim, to replacement stoppers and overflow plates, we've got it!
Complete Tub Drain Trim Kits
Universal Tub Drain Trim Kits
Fits most (not all) coarse-thread strainer bodies
These Watco trim kits feature:
- Completely covers existing trim - no need to pull out existing strainer bodies - eliminates the labor required to remove and replace strainer body and the possibility of cross-threading
- Trim kit cover is thin (.03") and will not create a water dam
- Installs on the rough-in for a great look
- No flow rate reduction
- Includes o-ring for a snug fit
- Includes silicon adhesive for strainer body
- Push pull brass stopper with 3/8" & 5/16" pins - 1-1/4" length
- Choose single hole overflow plate or two hole overflow plate
- Available in many decorative finishes
- See how easy it is to install one of these great tub drain trim kits
- Requires:
- 1-5/8" (1.600") minimum ID opening
- 2-7/8" (2.875") maximum OD flange
Single Hole Overflow Plates:
Double Hole Overflow Plates:
Please note: Please make sure this will work for your tub prior to ordering.
Push Pull, Lift & Turn, and Foot Actuated (Toe Touch) Drains
Push Pull Drain Assembly - Coarse Threads
This Watco drain assembly features:
- For push pull drain closures
- Complete assembly with strainer body and stopper
- Wide flange - 3" O.D.
- Coarse threads
- Thread count: 11-1/2 TPI x 1-1/4" long
- Approximate outside diameter of threads 1.865" (1-7/8")
- Brass construction
- Drain washer #10696 (located under tub) sold separately below
Push Pull Drain Assembly - Fine Threads
This Watco drain assembly features:
- For push pull drain closures
- Complete assembly with strainer body and stopper
- Wide flange - 3" O.D.
- Fine threads
- Thread count: 16 TPI x 1.25" long
- Approximate outside diameter of threads 1.625" (1-5/8")
- Brass construction
Extra Long Thread Toe Touch Tub Drain Strainer (3", 4" or 5" Long)
For thick tubs
These Jaclo strainer body features:
- 3", 4" or 5" length threads for thick tubs
- Brass body
- Flange width: 2-13/16" O.D.
- Coarse threads
- Thread count: 11-1/2 TPI x 3", 4" or 5" long
- Approximate outside diameter of threads 1-7/8"
- Forged brass toe touch cap (2" diameter)
- Fits into 11028 and 11008 drain elbows
- Toe touch mechanism has 5/16"-16 post pin
- Durable chrome finish
PresFlo® Push Down Tub Drain Stopper
This Watco push down tub drain stopper features:
- Brass strainer body works on fiberglass, acrylic and cast iron tubs
- Flange width: 2-7/8" O.D.
- Coarse threads
- Thread count: 11-1/2 TPI x 1-1/4" long
- Approximate outside diameter of threads 1-7/8"
- Simply push down any part of stopper edge next to flange to open
- PresFlo® stopper swivels in all directions
- When in open, flow through position, stopper is unable to be removed
- Ideal for immense use in motels, hotels, or rental properties
- Fits into 11028 and 11008 drain elbows
Replacement Stoppers
Push-Pull Replacement Stopper - #38610:
Strainer Bodies
Fine Thread Strainer Body #01022
This Watco strainer body features:
- For lift and turn, push pull and foot actuated drain closures
- Accepts stopper #38610 and #38412
- Fine threads
- Thread count: 16 TPI x 1.25" long
- Approximate outside diameter of threads 1.625" (1-5/8")
- Flange width: 2.812" (2 13/16") O.D.
- Brass construction with plated finish
Fine Thread Strainer Body - 01022:
Coarse Thread Strainer Body #01016
This Watco strainer body features:
- For lift and turn, push pull and foot actuated drain closures
- Accepts stopper #38610 and #38412
- Coarse threads
- Thread count: 11-1/2 TPI x 1.25" long
- Approximate outside diameter of threads 1.865" (1-7/8")
- Flange width: 2.812" (2 13/16") O.D.
- Brass construction with plated finish
Coarse Thread Strainer Body - 01016:
Fine Thread Strainer Body #01017
This Watco strainer body features:
- For push pull drain closures
- Accepts stopper #38610
- Fine threads
- Thread count: 16 TPI x 1.00" long
- Approximate outside diameter of threads 1.625" (1-5/8")
- Flange width: 2.812" (2 13/16") O.D.
- Brass constructed with plated finish overlay
Fine Thread Strainer Body - 01017:
Metal Overflow Plates
& Screws
Overflow Cover Plate #01002
This overflow cover plate features:
- 1 screw hole
- Uses one #01024 finish-matching screw - sold separately
- Brass construction
One Hole Overflow Cover Plate - 01002
Overflow Cover Plate #01003
This overflow cover plate features:
- 2 screw holes
- Uses two #01024 finish-matching screws - sold separately
- Cast zinc construction
- Dimensions: 3-1/4" OD x 2" between screw holes
Two Hole Overflow Cover Plate - 01003:
Trip Lever Overflow Plate #10700
This trip lever overflow plate features:
- 2 screw holes
- Uses two #01024 finish-matching screws - sold separately
- Brass construction
- Dimensions: 3-1/4" OD x 2" between screw holes
Trip Lever Overflow Plate - 10700:
Trip Lever Overflow Plate "Like" 10700
This budget trip lever overflow plate features:
- "Will fit" Watco trip levers
- No markings/imprints - brass construction
- Uses two #01024 finish-matching screws - sold separately
"Will Fit" 10700 Trip Lever Overflow Plate:
Overflow & Trip Lever Plate Screw #01024
This overflow and trip lever plate screw features:
- Fits one and two-hole overflow plates
- Fits two-hole trip lever overflow plates
- Brass construction
- Approx. 2" to 2 1/4" length
- Sold per Each
- Two-hole plates require 2 screws
Overflow & Trip Lever Plate Screw - 01024:
Trip Lever Waste & Overflow Assembly
1-1/2" OD tubing - Fits most tubs 14" - 16" high
This Watco waste and overflow assembly features:
- Designed for heavy-duty use in hotels, motels, and rental properties
- Metal strainer body for cast iron or plastic tubs
- Theft resistant brass stopper
- Replaceable drip-proof Buna-N-Seal
- Retainer plate for overflow elbow
- Slip joint assembly with coarse threading for easy installation
- View components
- View dimensions
Trip Lever Waste & Overflow Assembly:
Push Pull Waste & Overflow Assembly #601-PP-ABS
Fit most tubs - 1-1/2" pipe/SAN tee not included - single screw mount
Push-Pull Waste & Overflow Assembly:
Strainer Cover Plates & Screws for Trip Lever Assembly
These Watco strainer cover plates features:
- 2 7/8" diameter cover plate
- For trip lever, slip lock trip lever, quick adjust trip lever and turnstyle drain closures
- Fits over and completely covers #11495 and #11490 drain bodies
- Stainless steel cover plate with plated finish
- Screws (sold separately) are brass with plated finish
Strainer Cover Plate - 01006:
Strainer Cover Plate Screw - 01040:
Trip Lever Assembly Kit
Fits most tubs up to 16" high
Trip lever face plate assembly includes:
- #10700 Trip lever face plate
- #10930 Cotter pin
- #10950 Quick adjust clevis
- #10953 Top linkage eye bolt
- #10954 Double loop wire
- #10952 Linkage nut
and 1 Each of one of the following:
- #11005 ABS Drop cylinder - (for ABS units)
- #14005 PVC Drop cylinder - (for PVC units)
- #41005 Brass Drop cylinder - (for Brass units)
Trip Lever Assembly Kit -
24" Deep Tubs
Fits most tubs up to 24" high
Trip lever face plate assembly includes:
- #10700 Trip lever face plate
- #10930 Cotter pin
- #10950 Quick adjust clevis
- #10953 Top linkage eye bolt
- #10952 Linkage nut
- #14005 PVC Drop cylinder - (for PVC units)
- #10954 Double loop wire plus 4 additional loop wires
for length adjustment as needed
Faceplate screws sold separately - use 01024
Trip Lever Assembly Kit for Deep Tubs #10771:
Misc. Parts for Trip Lever Assembly
Misc. Parts for Push Pull Assembly
Misc. Bathtub Overflow Parts
The Drain Key™
Tub Drain Removal Tool
Expands with a crescent type wrench to unlock or install:
- Bathtub drains
- 1-1/4" or 1-1/2" closet spuds
- Jr. basket strainers, Jr. Duo strainers
- Tray plug drains and duplex strainers
- View the step by step instructions on how it works
Opens to approximately 1-5/8" so it can easily handle drain bodies up to 1-1/2"
Removes 1-1/4" or 1-1/2" trap (dirty arm) nipples.
It's unique expanding design allows The Drain Key to internally grip in a 360° pattern.
Smart Dumbell™ Tub Drain Removal Tool
This tool features:
- Fits 95% of all tub drains
- Installs or removes drains with crossbars
- Heavy duty die-cast aluminum
- Prevents scratching of decorative finishes
- Either a crescent wrench or a large
screwdriver can be used to turn the tool
- Saves time, money and aggravation
- View the step by step instructions on how it works
Tub Drain Removal Tools:
Amazing Sta Put™ Ultra Plumbers Putty
This putty features:
- Non staining
- Great for stone, granite, marble, & other porous surfaces
- Easy to use, non toxic, and pleasant to handle
- Can be used just like regular plumbers putty. It can easily be molded into rings or other shapes to conform to the item being installed
- Malleable & flexible
- Does not melt, rot, crumble, dry out, or shrink even when used on surfaces such as wood or concrete
Sta Put™ Ultra Plumbers Putty
14 Ounces - $9.10
Hair Catching & Drain Cleaning Brush
This Brushtech cleaning brush features:
- Easily remove hair clogs from sink and tub drains
- Great for homes as well as hotels and gyms
- Thin flexible brush bypasses push/pull and toe touch type stoppers
- Choose standard 13" length for showers and sinks or extra long 25.5" length for sink overflows, tubs, and whirlpool baths
- 13" OR 25.5" length x 0.5" brush diameter x 1" handle diameter
- View how to use this brush
- Proudly made in the USA
Hair Catching & Drain Cleaning Brushes:
Order 12, 24, 48 or more of the same item for additional savings!
Pricing discounts will show up in your shopping cart.
Frequently Asked Questions
Q. "What is ABS pipe?"
A. Acrylonitrile Butadiene Styrene (ABS) pipe is a black plastic pipe used for water distribution, drain, waste, vent and sewage applications.
Q. "What are the measurements of the #500-TL-ABS trip-lever drain assembly itself?"
A. The distance between the center of the horizontal drain line and the screws on the overflow plate cannot exceed 14-1/2" or be less than 9". The distance between the center of the vertical tubular vent line and the center of the tub drain itself cannot exceed 7-1/2" or be less than 6-3/4".
Q. "What is TPI?"
A. TPI stands for "threads per inch." You need to match the threads per inch of the strainer body with the drain shoe (the bit the strainer body screws into that connects to the waste piping).
Q. "I purchased a stainless steel strainer that has an oil rubbed bronze finish. I have had it for less than a year and it appears to be rusting. I thought stainless steel would not rust?"
A. Stainless steel does not rust, stain or corrode when used in most residential water conditions. However, some cleaning products can cause it to corrode. Avoid cleaners containing chlorides, like bleach for example. Chlorides can be very detrimental to stainless steel depending on the level of concentration and the type of stainless steel. We suggest a mild cleanser be used and then rinsed thoroughly.
